Reorder some options in the config sample

alsoftrc.sample

@@ -30,6 +30,15 @@
 #  'all' disables use of all such specialized methods.
 #disable-cpu-exts =
 
+## drivers:
+#  Sets the backend driver list order, comma-seperated. Unknown backends and
+#  duplicated names are ignored. Unlisted backends won't be considered for use
+#  unless the list is ended with a comma (e.g. 'oss,' will try OSS first before
+#  other backends, while 'oss' will try OSS only). Backends prepended with -
+#  won't be considered for use (e.g. '-oss,' will try all available backends
+#  except OSS). An empty list means to try all backends.
+#drivers =
+
 ## channels:
 #  Sets the output channel configuration. If left unspecified, one will try to
 #  be detected from the system, and defaulting to stereo. The available values
@@ -48,6 +57,23 @@
 #  float32 - 32-bit float
 #sample-type = float32
 
+## frequency:
+#  Sets the output frequency. If left unspecified it will try to detect a
+#  default from the system, otherwise it will default to 44100.
+#frequency =
+
+## period_size:
+#  Sets the update period size, in frames. This is the number of frames needed
+#  for each mixing update. Acceptable values range between 64 and 8192.
+#period_size = 1024
+
+## periods:
+#  Sets the number of update periods. Higher values create a larger mix ahead,
+#  which helps protect against skips when the CPU is under load, but increases
+#  the delay between a sound getting mixed and being heard. Acceptable values
+#  range between 2 and 16.
+#periods = 4
+
 ## hrtf:
 #  Enables HRTF filters. These filters provide for better sound spatialization
 #  while using headphones. The default filter will only work when output is
@@ -84,19 +110,6 @@
 #  stereo modes.
 #cf_level = 0
 
-## wide-stereo:
-#  Specifies that stereo sources are given a width of about 120 degrees on each
-#  channel, centering on -90 (left) and +90 (right), as opposed to being points
-#  placed at -30 (left) and +30 (right). This can be useful for surround-sound
-#  to give stereo sources a more encompassing sound. Note that the sound's
-#  overall volume will be slightly reduced to account for the extra output.
-#wide-stereo = false
-
-## frequency:
-#  Sets the output frequency. If left unspecified it will try to detect a
-#  default from the system, otherwise it will default to 44100.
-#frequency =
-
 ## resampler:
 #  Selects the resampler used when mixing sources. Valid values are:
 #  point - nearest sample, no interpolation
@@ -105,6 +118,14 @@
 #  Specifying other values will result in using the default (linear).
 #resampler = linear
 
+## wide-stereo:
+#  Specifies that stereo sources are given a width of about 120 degrees on each
+#  channel, centering on -90 (left) and +90 (right), as opposed to being points
+#  placed at -30 (left) and +30 (right). This can be useful for surround-sound
+#  to give stereo sources a more encompassing sound. Note that the sound's
+#  overall volume will be slightly reduced to account for the extra output.
+#wide-stereo = false
+
 ## rt-prio:
 #  Sets real-time priority for the mixing thread. Not all drivers may use this
 #  (eg. PortAudio) as they already control the priority of the mixing thread.
@@ -114,39 +135,11 @@
 #  disabled.
 #rt-prio = 0
 
-## period_size:
-#  Sets the update period size, in frames. This is the number of frames needed
-#  for each mixing update. Acceptable values range between 64 and 8192.
-#period_size = 1024
-
-## periods:
-#  Sets the number of update periods. Higher values create a larger mix ahead,
-#  which helps protect against skips when the CPU is under load, but increases
-#  the delay between a sound getting mixed and being heard. Acceptable values
-#  range between 2 and 16.
-#periods = 4
-
 ## sources:
 #  Sets the maximum number of allocatable sources. Lower values may help for
 #  systems with apps that try to play more sounds than the CPU can handle.
 #sources = 256
 
-## drivers:
-#  Sets the backend driver list order, comma-seperated. Unknown backends and
-#  duplicated names are ignored. Unlisted backends won't be considered for use
-#  unless the list is ended with a comma (e.g. 'oss,' will try OSS first before
-#  other backends, while 'oss' will try OSS only). Backends prepended with -
-#  won't be considered for use (e.g. '-oss,' will try all available backends
-#  except OSS). An empty list means to try all backends.
-#drivers =
-
-## excludefx:
-#  Sets which effects to exclude, preventing apps from using them. This can
-#  help for apps that try to use effects which are too CPU intensive for the
-#  system to handle. Available effects are: eaxreverb,reverb,autowah,chorus,
-#  compressor,distortion,echo,equalizer,flanger,modulator,dedicated
-#excludefx =
-
 ## slots:
 #  Sets the maximum number of Auxiliary Effect Slots an app can create. A slot
 #  can use a non-negligible amount of CPU time if an effect is set on it even
@@ -160,6 +153,13 @@
 #  possible is 4.
 #sends =
 
+## excludefx:
+#  Sets which effects to exclude, preventing apps from using them. This can
+#  help for apps that try to use effects which are too CPU intensive for the
+#  system to handle. Available effects are: eaxreverb,reverb,autowah,chorus,
+#  compressor,distortion,echo,equalizer,flanger,modulator,dedicated
+#excludefx =
+
 ## layout:
 #  Sets the virtual speaker layout. Values are specified in degrees, where 0 is
 #  straight in front, negative goes left, and positive goes right. Unspecified