15ad5245bf
Move the FPU mode declarations to a separate header
...
Also don't use inheritance with FPUCtl.
2018-01-11 08:44:52 -08:00
8aa9e35f8c
Move the config function declarations to their own header
...
And rename alcConfig.c to alconfig.c for consistency.
2018-01-11 07:56:54 -08:00
81b13f78ea
Move the CPU capability flags to a separate header
2018-01-11 07:19:19 -08:00
9b9ec2c21a
Move the compressor/limiter declarations to their own header
2018-01-11 06:50:53 -08:00
f3c9bc114c
Move the polymorphic/inheritance macros to a separate header
2018-01-11 06:32:45 -08:00
ff231b42ff
Reorder some loops in the equalizer and use MixSamples
2018-01-11 05:03:00 -08:00
9c33f4aea8
Use MixSamples for the dedicated and ring modulator effect output
2018-01-11 04:48:18 -08:00
f55583330b
Apply the distortion gain to the mixing gains
2018-01-11 04:34:51 -08:00
2c8e4467c3
Move some HRTF structures to hrtf.h
2018-01-11 03:53:25 -08:00
15f9d15ba0
Avoid using macros to access anonymous structures
2018-01-11 03:45:23 -08:00
279799ad70
Don't return whether the bsinc filter cuts or not
2018-01-10 19:20:58 -08:00
ea6b384980
Make a function pointer static
2018-01-10 19:13:41 -08:00
ef63ec3fe9
Use one macro to handle both resample padding sizes
2018-01-09 23:55:59 -08:00
de8c5b1824
Combine the chorus and flanger processing functions
...
Given that they're nearly identical, it should be relatively simple to use the
same effect state to process either of them, similar to the reverbs. The big
differences seem to be the delay range (much shorter with flanger) and the
defaults.
2018-01-09 23:21:16 -08:00
9e2eb5dc23
Rename the device's temp buffer storage to be more generic
2018-01-09 22:01:46 -08:00
5d1207104a
Remove standard reverb specific processing functions
2018-01-07 22:48:03 -08:00
d547f52d8f
Move the UNEXPECTED macro to the main header and rename it
2018-01-07 22:20:08 -08:00
56e9cb69d3
Ensure the chorus delay and depth leave enough padding for resampling
...
Also use cubic resampling for the modulated tap. Applies to flanger too.
2018-01-07 21:15:18 -08:00
70973035de
Use a separate function to get the cubic value
2018-01-07 17:24:29 -08:00
c8a30592e8
Only print the time in alffplay when it changes
2018-01-07 17:23:51 -08:00
d8258984b4
Use a -40dB drop for bsinc12
...
This improves the transition width at the cost of slightly more audible high-
frequency noise (nothing compared to linear or cubic, but still some). The
previous transition band caused a noticeable loss in higher frequencies, making
lower sample rate sources sound exceptionally dull or muffled.
2018-01-07 06:43:35 -08:00
c423b6c8b7
Remove the sinc4 table
2018-01-07 05:58:52 -08:00
4cc1c64646
Replace the sinc4 resampler with cubic
...
Turns out the C version of the cubic resampler is just slightly faster than
even the SSE3 version of the FIR4 resampler. This is likely due to not using a
64KB random-access lookup table along with unaligned loads, both offseting the
gains from SSE.
2018-01-07 05:32:07 -08:00
0e1fd34c89
Fix a temp buffer leak in alffplay
2018-01-05 20:41:55 -08:00
10f2531b6c
Handle the audio clock diff as nanoseconds in alffplay
2018-01-05 05:41:57 -08:00
ecd327e5e1
Test the correct offset for the loop start range
2018-01-04 21:21:48 -08:00
510bccb6ac
Use the correct start point when looping
2018-01-04 20:21:46 -08:00
32330c5eef
Use separate outputs for the vector reverse and scatter functions
2018-01-04 20:04:39 -08:00
e00ef16893
Avoid the modulated output tap for late reverb
...
And fix the output filtering. The modulation code is still there since it's
(probably) technically correct, but the interaction with the feedback loop and
filtering on the output caused improper behavior which needs to be sorted out.
2018-01-04 19:17:16 -08:00
fd8143fea0
Use a non-recursive mutex for alffplay's source lock
2018-01-03 19:05:25 -08:00
08a4840298
Don't offset the reverb modulation sinus
2018-01-02 19:52:57 -08:00
a16f933e3a
Use a float literal for float math
2018-01-02 19:44:31 -08:00
9d61f429a5
Use ALC_SOFT_device_clock in alffplay
2018-01-02 19:32:28 -08:00
b8de63d608
Reset CompLen when loading loop repeats in the mixer
2018-01-02 19:29:58 -08:00
dcc0f6e25d
Improve starting synchronization in alffplay
...
It waits until the internal buffers are filled before starting playback, then
triggering the audio and video to start as close together as possible.
2018-01-02 03:31:12 -08:00
21684fac69
Inline and simplify some code
2018-01-01 22:28:28 -08:00
329333ca8b
Don't leak the AVIOContext
2018-01-01 19:16:05 -08:00
91e20dc12e
Fix a couple alffplay comments still referencing Alure
2018-01-01 18:54:15 -08:00
aecfa0b426
Make smart pointer wrappers for some ffmpeg types
2018-01-01 18:47:48 -08:00
9675068706
Print the running time and duration in alffplay
2018-01-01 16:15:32 -08:00
cbd55ad31e
Use aliases to simplify some time type names
2018-01-01 02:26:39 -08:00
5eb1753d31
Wrap av_gettime to ensure it's interpreted as microseconds
2018-01-01 01:39:28 -08:00
e277f5e268
Rename the do_direct_out variable
2018-01-01 01:14:53 -08:00
145bf52b7a
Use a less-intense memory order to check for quitting
2018-01-01 01:13:32 -08:00
fe7bdc93eb
Check for AL_SOFT_direct_channels once when initializing
2018-01-01 01:07:29 -08:00
d889435334
Declare the total buffer time instead of buffer count
2018-01-01 01:04:47 -08:00
dad17a7d91
Use a std::array for the buffers in alffplay
2018-01-01 00:32:27 -08:00
830adf6ae8
Use inline member initialization where possible
2018-01-01 00:17:40 -08:00
babfa70cab
Make more values global const
2018-01-01 00:02:51 -08:00
258eadd003
Use a global to specify alffplay's audio sync threshold
2017-12-31 23:44:33 -08:00
Chris Robinson