2b013fc54e
Make the dithering depth configurable
2017-06-17 23:09:51 -07:00
e6be113903
Add an option to dither 8- and 16-bit output
2017-05-23 00:35:22 -07:00
8f56c9522e
Document the output-limiter config option
...
Expose it in alsoft-config as well.
2017-04-26 19:27:50 -07:00
097ed84a87
Handle the nfc-ref-delay config option
2017-03-12 13:24:16 -07:00
f276e83c8d
Document the nfc config option and expose it in alsoft-config
2017-03-12 08:56:19 -07:00
0ce4c9b8fa
Rename stereo-panning option to stereo-encoding
...
Also rename the 'paired' value to 'panpot', and make it the default.
2017-02-22 19:18:01 -08:00
55e3b840b3
Reduce the default period count to 3
2017-02-22 15:56:09 -08:00
2dd142fed0
Make the "sends" config option act as a limit
...
Instead of forcing the device to always use the specified send count, it simply
limits requests to it.
2017-02-21 17:23:54 -08:00
d3cc867bd4
Increase the default effect slot and send count
...
The default number of auxiliary effect slots is now 64. This can still be
raised by the config file without a hard maximum, but incurs processing cost
for each effect slot generated by the app.
The default number of source sends is now actually 2, as per the EFX docs.
However, it can be raised up to 16 via ALC_MAX_AUXILIARY_SENDS attribute
requests, rather than the previous 4.
2017-02-21 16:54:55 -08:00
23a34f732b
Remove mention of the sinc8 resampler
2017-02-20 09:13:08 -08:00
5a2ef2590f
Allow distance compensation for non-HQ rendering as well
...
It still requires a custom configuration to specify appropriate speaker
distances.
2017-02-20 09:08:57 -08:00
b23f81b686
Remove the separate surround51rear decoder option
...
Both 5.1 Side and Rear configurations use 'surround51' to look up the
appropriate decoder file. The decoder loader already handles mapping between
rear and side channels, so there's no need for separate options.
2017-02-19 22:59:55 -08:00
f5e4a3ed85
Add a volume-adjust config option to adjust the source output volume
...
Designed for apps that either don't change the listener's AL_GAIN, or don't
allow the listener's AL_GAIN to go above 1. This allows the volume to still be
increased further than such apps may allow, if users find it too quiet.
Be aware that increasing this can easily cause clipping. The gain limit
reported by AL_GAIN_LIMIT_SOFT is also affected by this.
2016-09-24 18:46:41 -07:00
4bcd2fbb2e
Add an option to specify the ambisonic output configuration
2016-07-31 07:46:38 -07:00
af258efda4
Update alsoftrc.sample with the new channel configurations
2016-07-30 16:24:46 -07:00
e4380ece5e
Update alsoftrc.sample for proper txt filenames
2016-07-30 15:56:22 -07:00
3387f23074
Update a config option comment
2016-04-22 02:19:43 -07:00
91d53560d6
Add a text file describing AmbDec config file support.
2016-03-27 01:57:28 -07:00
764d580100
Document the ambisonic decoder options
2016-03-26 21:39:12 -07:00
99f685d20d
Add an option for pair-wise stereo panning
2016-02-26 21:48:03 -08:00
68a2ae4024
Replace the hrtf_tables option with hrtf-paths
2016-02-23 10:56:06 -08:00
ae1a2fa9c0
Allow selecting a preferred HRTF in alsoft-config
...
This currently only checks the default paths when they're being used.
2016-02-23 06:52:13 -08:00
e6f120df23
Add a config option to specify the preferred HRTF
2016-02-21 02:44:02 -08:00
455d5f48c0
Use %s.mhr for the default hrtf table list
2015-12-05 17:49:05 -08:00
21998924d8
Support %s as a string matching marker
2015-12-05 17:45:56 -08:00
10bcda27a9
Remove autowah from the excludefx list
...
The autowah effect hasn't been enabled for some time due to issues with it
breaking output, and doesn't seem likely to get fixed any time soon.
2015-11-09 14:25:20 -08:00
062d7e3487
Update the fix-rate config option description
2015-11-09 11:47:56 -08:00
9891d61206
Add options to disable Pulse's and ALSA's resamplers
2015-11-07 23:05:45 -08:00
b9e192b78a
Implement a band-limited sinc resampler
...
This is essentially a 12-point sinc resampler, unless it's resampling to a rate
higher than the output, at which point it will vary between 12 and 24 points
and do anti-aliasing to avoid/reduce frequencies going over nyquist.
Code provided by Christopher Fitzgerald.
2015-11-05 09:42:08 -08:00
bd0acf2843
Replace the Lanczos window with Kaiser for the sinc resampler
2015-11-04 06:40:54 -08:00
6689c61ff4
Remove the MIDI code
...
The extension's not going anywhere, and it can't do anything fluidsynth can't.
The code maintenance and bloat is not worth keeping around, and ideally the AL
API would be able to facilitate MIDI-like behavior anyway (envelopes, start-at-
time, etc).
2015-10-20 18:01:27 -07:00
00e419e948
Replace the sinc6 resampler with sinc8, and make SSE versions
2015-10-11 07:37:22 -07:00
0211831858
Move the FIR4 from SSE2 to SSE3
...
SSE3 can avoid the slow _MM_TRANSPOSE_PS4 call thanks to the inclusion of
horizontal adds.
2015-10-11 06:38:00 -07:00
dc10e56bab
Implement a 6-point sinc-lanczos filter
2015-09-29 20:39:12 -07:00
848a4a0fcc
Auto-replace the "cubic" resampler with "sinc4"
2015-09-28 12:59:52 -07:00
ab6622a8d6
Replace the cubic resampler with a 4-point sinc/lanczos filter
2015-09-27 23:57:25 -07:00
5f5eebc4df
Allow the hrtf_tables option to be device-specific
2015-09-20 08:28:34 -07:00
28a516e8a5
Change the hrtf config option to expect auto/true/false instead of a bool
2015-09-04 20:16:48 -07:00
0eb83fe462
Make option and block names case-sensitive
...
This is to avoid any issues with device names that can be case-sensitive, and
strcasecmp not working properly for non-ASCII-7 uppercase characters.
2015-09-04 16:09:09 -07:00
5f40daabc2
Reverse the device and block names for device-specific options
2015-09-04 15:47:48 -07:00
2cb974df40
Document the bformat config option
2015-08-28 15:53:17 -07:00
8fe421cba1
Document device-specific config options
2015-08-28 14:48:33 -07:00
01f9cb4072
Update the default value for JACK's spawn-server option
2015-08-26 12:50:54 -07:00
beb670a939
Add an option to prevent spawning a JACK server
2014-12-22 19:29:55 -08:00
b8d98dd6d0
Add an option for an increased ringbuffer size with JACK
2014-12-22 18:48:54 -08:00
ccbb3f069f
Update some config descriptions
2014-11-22 22:00:44 -08:00
d77c6153e7
Document the stereo-mode config option
2014-11-22 21:02:25 -08:00
3eab44001d
Remove the unused layout config options
2014-11-08 15:44:07 -08:00
a50ba603ab
Remove the unused wide-stereo option
2014-11-08 06:36:45 -08:00
c053617066
Reorder some options in the config sample
2014-11-08 05:59:08 -08:00
Chris Robinson