f42f655ea9
Don't unlock the pulseaudio mainloop when mixing
...
Lock contention could cause a lengthy delay between mixing and writing the
audio. There shouldn't be any risk of dead-locking as the device lock should
never be held when the mainloop gets locked.
2012-08-12 03:52:38 -07:00
8304fc1bef
Handle the scalar values a bit better
2012-08-11 06:20:24 -07:00
ea84fee952
Use a more efficient method to blend HRTF delays and coefficients
2012-08-11 02:16:34 -07:00
d6fd52a0e5
Add an option for wide stereo sources
...
Replaces the old stereodup option
2012-08-09 05:38:07 -07:00
0dde7dd88a
Use a more efficient method to offset the speaker angles when computing gains
2012-08-09 02:31:19 -07:00
1323e11701
Interpolate between HRTF delay samples using the delay fraction
2012-07-20 15:08:11 -07:00
7ac9944bb3
Increase the directional change sensitivity for the HRTF delta
2012-07-20 14:38:49 -07:00
e32e2fd6b8
Fix an inadvertent change in the HRTF coefficient stepping value array size
2012-07-19 11:49:43 -07:00
6bd535bed0
Use wrappers for float-typed math functions
2012-06-29 02:12:36 -07:00
524c88c402
Test the squared length of a vector before normalizing
2012-06-28 20:54:10 -07:00
1c096b101d
Minor typo fixes
2012-06-28 19:57:23 -07:00
583dc8dbca
Don't use all caps for enum value names
2012-06-28 18:49:49 -07:00
befa4e7528
Don't try to set FE_TOWARDZERO when it's not available
2012-06-28 18:27:45 -07:00
bc6751237c
Clamp the Y position before trying to get the elevation
2012-06-28 17:26:00 -07:00
6f3be31b60
Add some includes
2012-06-20 03:01:19 -07:00
8001d86751
Add missing include
2012-06-19 22:15:19 -07:00
acca3e5a21
Use a proper method to wait for a PulseAudio operation
2012-06-19 10:37:09 -07:00
d17f835e74
Remove an unused include
2012-06-19 04:02:55 -07:00
ef1f8aa9a0
Don't needlessly verify a device
2012-06-19 00:25:45 -07:00
a5ac6eb524
Remove an outdated comment about _REENTRANT
2012-06-18 02:04:10 -07:00
ac84d95c6e
Silence some GCC warnings
2012-06-17 22:17:03 -07:00
785f52aa29
Only try float32 with DSound when specifically requested
...
Some hardware drivers seem to have a bug where a buffer descriptor with a
32-bit float sample type ends up creating a non-float32 buffer.
2012-06-17 04:13:01 -07:00
051195a991
Avoid failing if ALSA can't set a buffer or period time near to our request
...
These functions should not fail, but there seem to be bugs that cause them to
sometimes. We're flexible enough to handle almost anything it throws back at us
though, so anything is better than nothing here.
2012-06-16 23:02:59 -07:00
90ca6675c2
Allow PulseAudio to spawn a server by default
...
Since only one backend is used at a time now, the issues with device ownership
aren't really prevelant anymore. An application that tries to open all
enumerated devices won't run into the problem of spawning a server and end up
preventing other backend devices from working.
2012-06-16 22:37:45 -07:00
0db9730a50
Add an option to allow PulseAudio to move streams
...
This could be made the default, if there's a safe way to update the AL device
specifier.
2012-06-16 22:32:19 -07:00
ad2643d8af
Clarify some comments, fix some definition ordering, and add some includes
2012-06-15 23:46:09 -07:00
46840ee787
Add DEVPKEY_Device_FriendlyName declaration for mingw-w64 compatibility
2012-06-14 18:10:10 -07:00
1e0282a238
Add some more entries to .gitignore
2012-05-09 16:30:22 -07:00
259e4f5b38
Rename AllDevice -> AllDevices
2012-05-09 16:28:16 -07:00
e44229c74e
Clamp the ALSA period time between min and max if setting near fails
2012-05-08 01:23:53 -07:00
92827cc467
Clamp the ALSA buffer time between min and max if setting near fails
...
It seems there's some bugs with snd_pcm_hw_params_set_buffer_time_near that
cause it to return "invalid argument" despite a valid nearby buffer time being
available. Clamping the buffer time seems to mitigate the issue a bit.
2012-05-07 11:42:59 -07:00
dd3d5bc2d4
Look for libsndio.so.2 instead of libsndio.so
2012-05-05 16:19:51 -07:00
b4c7b3309a
Only use _FPU_GETCW and _FPU_SETCW for x86 targets
2012-05-03 12:15:51 -07:00
010a66487d
Use 2 chained one-pole filters for the wet path
2012-04-30 09:33:00 -07:00
aed35fd811
Use ComputeAngleGains for multi-channel sources and remove the unused lookup table stuff
2012-04-29 05:04:46 -07:00
8d9838012d
Remove the stereodup option
...
There's better ways to do it now with "wide" sound sources.
2012-04-29 04:44:53 -07:00
57d36ec582
Fix a couple comment typos, and a minor cleanup
2012-04-29 03:39:08 -07:00
febc2a50cb
Use ComputeAngleGains for 3D sounds
2012-04-28 13:06:16 -07:00
74e128bd0f
Fix ComputeAngleGains
...
The old code would improperly handle speakers just inside or outside the
coverage area if it had to be inverted. It also didn't properly handle when
only one speaker was outside of the covered area.
2012-04-28 12:12:02 -07:00
c34d78f417
Use ComputeAngleGains for the echo and dedicated effects
2012-04-28 08:24:09 -07:00
611bd0b2d3
Add a method to calculate gains given a sound point and its half-width, and use it for reverb
...
The half-width ranges from 0 to pi, and essentially specifies the coverage area
around the listener. At 0, it's an infinitely small point sound and behaves
like a usual panning sound. At pi/2 it covers half the area, and at pi it
covers the whole area.
2012-04-28 08:21:53 -07:00
267d38cf20
Flip the parameters to aluCart2LUTpos, so it behaves a bit more like atan2
2012-04-28 03:58:58 -07:00
26456f13e1
Pass the direct/send params to the mixer instead of accessing through the source
2012-04-28 03:31:13 -07:00
2484c44db0
Apply the listener gain with the filter
2012-04-28 03:13:37 -07:00
a8a13fcbd8
Move the HrtfParams into the DirectParams
2012-04-28 02:23:53 -07:00
0a193c5645
Move the direct and send params into separate different types
2012-04-28 01:32:52 -07:00
2450ee1723
Use separate methods for the dry and wet mixing loops
2012-04-27 23:46:51 -07:00
67f1cdfcbe
Store the speaker angles in the device
2012-04-27 07:38:17 -07:00
549d542a31
Reorganize some ALsource fields
2012-04-27 01:36:13 -07:00
2cdb58fb85
The mixer always uses floats
2012-04-26 07:50:17 -07:00
Chris Robinson